PROFACE PL-B910 Series User Manual page 65

System Setup
! Video
The selections for the screen (video) mode. The [EGA/VGA] selection is
factory set and recommended for most users. The other available settings
are [CGA40], [CGA80] and [Mono].
! VGA Text Mode
This mode changes the screen (video) mode from [Normal](VGA mode)
to [Expansion](800×600). The[Normal] selection is factory set and
recommended for most users.
! VGA Graphics Mode
This mode changes the screen (Graphics) mode from [Normal](VGA mode)
to [Expansion](800×600). The[Normal] selection is factory set and
recommended for most users.
! Halt On
Designates the type of processing that will be performed when an error
occurs during the Initial Start-Up's Self Test. The [All But Disk /Key]
selection is factory set and recommended for most users.
[All Errors]
[No Errors]
[All,But Keyboard] : Displays all errors, except for those related to
[All,But Diskette]
[All,But Disk/Key] : Displays all errors, except for those related to the disk
PL B900/B910 Series Users Manual
: Displays all errors and stops the unit.
: Displays all errors and does not stop the unit.
the keyboard, and stops the unit. If the User has
no keyboard connected, please use this setting.
: Displays all errors, except for those related to
the disk drive (FDD), and stops the unit.
drive (FDD) and keyboard, and then stops the unit.
5-3