Load Bios Defaults; Load Setup Defaults; System Monitor Utility - PROFACE PL-B910 Series User Manual

Hide thumbs

Table Of Contents

Table of Contents

! PCI #2 Access #1 Retry

Enables or disables the PCI "2 Access #1 Retry feature. [Enabled] and

[Disabled] are available. The [Disabled] setting is factory set and

recommended for most users.

! PCI IRQ Activated by

Designates the interrupt method used for the unit's PCI slots. [Level] or

[Edge] can be used. [Level] is factory set and recommended for most

users.

! Assign IRQ For USB

Designates if the interrupt is allocated for USB equipment or not.

[Enabled] and [Disabled] are available. The PL-B910/PL-B911 (PL-

B910 Series) units should be set to [Enabled].

5. 2. 6

Selecting "LOAD BIOS DEFAULTS" calls up the menu used to enter the mini-

mum level system settings. It is normally not used.

5. 2. 7

With a PL-B900, PL-B901 (PL-B900 Series) unit, selecting "Load Setup Default"

will revert the unit to the original factory settings.

With a PL-B910, PL-B911 (PL-B910 Series) unit, after selecting "Load Setup

Default", be sure to change the following settings to revert the unit to the original

factory settings.

• CHIPSET FEATURES SETUP

• PNP/PCI CONFIGURATION

• INTEGRATED PERIPHERALS Change [Onboard Serial Port 4] to [Disabled].

5. 2. 8

Selecting SYSTEM MONITOR UTILITY menu item displays the following screen.

CPU Warning Temperature :

System Warning Temp.

Power FAN : Tolerance : Disabled

CPU FAN

IN0(Vcore) : Tolerance : Disabled

IN2( 3.3V) : Tolerance : Disabled

IN3(

IN4( 12V) : Tolerance : Disabled

IN5( -12V) : Tolerance : Disabled

IN6( -5V) : Tolerance : Disabled

5-12