PROFACE PL-B910 Series User Manual page 4

Preface
• Avoid exposing the PL to, or operating the PL in direct
sunlight, high temperatures and humidity, and in areas
where excessive dust and vibration will occur.
• Avoid using the PL in areas where sudden, extreme
changes in temperature can occur. This may cause con-
densation to form inside the unit, possibly leading to an
accident.
• To prevent the PL from overheating, be sure its air circula-
tion vents are clear and clean, and keep the unit's opera-
tion area well-ventilated.
• Avoid operating or storing the PL near chemicals, or
where chemicals can come into contact with the unit.
• When the Standard display is connected to the PL, after
turning the display OFF, be sure to wait at least three (3)
seconds before turning it ON again.
When PL Hard Disk (HDD) data is lost:
• The Digital Electronics Corporation cannot be held re-
sponsible or provide any compensation for damage(s)
caused by the loss of data stored in the PL's hard disk
drive (HDD). It is therefore strongly suggested that all
important data and software be backed up regularly to an
external data backup device.
• Please be aware that the Digital Electronics Corporation
bears no responsibility for any damages resulting from
the customer's application of this unit's hardware or soft-
ware.
• Since the PL unit's hard disk drive (HDD) is a consum-
able item, i.e. it has a limited lifetime, be sure to back up
its data regularly and prepare a spare HDD unit.
• To prevent file data damage, be sure to shut down the
PL's OS before turning OFF the main power.
• After turning OFF the PL's power, wait until the internal
HDD stops spinning before turning on the power again
(approx. 5 seconds).
PL-B900/B910 Series Users Manual
CAUTIONS
4