Installing The Pl; Installation Procedures - PROFACE PL-B910 Series User Manual

Installation and Wiring
4.2

Installing the PL

4.2.1 Installation Procedures

Use the following procedures to install the PL into a solid panel.
Be sure to read the previous section's Installation Cautions in order to
install the PL safely.
When using the optional 19 inch Mount Panel, refer to the PL-RM200 unit's Installa-
tion guide for details.
1) Use the six (6) attachment screws included in the PL's packing box to attach the
mounting brackets tothe PL main unit. Be carful to attach each side's bracket to
the correct side.
2) Drill the attachment holes in the Installation Panel. Be sure to follow the di-
mensions given for the attachment holes.
3) Attach the PL to the Installation Panel with M4 screws.
First, insert the main unit attachment screws into the Installation Panel's holes,
but do not tighten them. Then, place the PL main unit on the panel so that the
bracket holes and the screw heads align. Last, slide the PL down so that the
main unit is supported by the main unit attachment screws. Tighten the screws
until the PL is secured in place.
Be sure to not use too much force when tightening the main unit at-
tachment screws. The torque required is from 0.5 to 0.6N•m.
M a i n U n i t
Attachment
Screws
PL B900/B910 Series Users Manual
2.5.3 Full Sized Cover Attachment Dimensions
M a i n U n i t
Attachment
Screws
4-3