Power Management Setup - PROFACE PL-B910 Series User Manual

5.2.4 POWER MANAGEMENT SETUP

Selecting the POWER MANAGEMENT SETUP menu item calls up the follow-
ing screen.
Power Management
PM Control by APM
Video Off Option
Video Off method
MODEM Use IRQ
HDD Power Down
Doze Mode
Suspend Mode
VGA
LPT & COM
HDD & FDD
DMA/master
! Power Management
You can choose from three power management options. These are [User
Define], [Min Saving] and [Max Saving]. The [User Define] selection is
factory set and recommended for most users.
! PM Control by APM
Designates if the power management is controlled by the APM. The two
selections available are [Yes] and [No]. The [No] selection is factory set
and recommended for most users.
Video Off Option
!
Turns the display off. The selections are [Always On], [Suspend
and [All Modes
for most users.
! Video Off Method
Designates the method of turning the display off. The available
selections are [V/H SYNC+Blank], [Blank Screen] and [DPMS
Support]. To turn off both the display and the Vertical / Horizontal
synchronous signal, select [V/H SYNC+Blank]. To turn off the display
only, select [Blank Screen]. Select [DPMS support] when the CRT
display is supported by DPMS. [V/H SYNC+Blank] is factory set and
recommended for most users.
5-8
ROM PCI/ISA BIOS(2A5LEU1C)
POWER MANAGEMENT SETUP
AWARD SOFTWARE, INC.
: User Define
: No
: Suspend% Off
: V/H SYNC+Blank
: NA
**PM Timers**
: 10Min
: Disable
: Disable
**PM Events**
: OFF
: LPT/COM
: ON
: OFF
Off]. [Suspend
%
Primary INTR
IRQ3 (COM 2)
IRQ4 (COM 1)
IRQ5 (LPT 2)
IRQ6 (Floppy Disk)
IRQ7 (LPT 1)
IRQ8 (RTC Alarm)
IRQ9 (IRQ2 Redir)
IRQ10 (Reserved)
IRQ11 (Reserved)
IRQ12 (PS/2 Mouse) : Primary
IRQ13 (Coprocessor)
IRQ14 (Hard Disk)
IRQ15 (Reserved)
ESC :Quit
F1 : Help
F5 : Old Values
F6 : Load BIOS Defaults
F7 : Load Setup Defaults
* The above settings are factory settings.
Off] is factory set and recommended
%
PL B900/B910 Series Users Manual
System Setup
: ON
: Primary
: Primary
: Primary
: Primary
: Primary
: Primary
: Primary
: Primary
: Primary
: Primary
: Primary
: Primary
: Select Item
$ % &
PU/PD/+/- : Modify
(Shift)F2 : Color
Off],
%