Wiring The Pl; Connecting The Power Cord - PROFACE PL-B910 Series User Manual

4.3

Wiring the PL

4.3.1 Connecting the Power Cord

Connect the PL's power cord to the PL's rear face power terminals.
Power Terminals
Power Switch
Use the following steps when connecting the power cord to the PL's power terminals.
• To prevent electric shocks, be sure to turn the PL OFF be-
fore connecting the power cord terminals to the PL.
• To avoid the dangers of fire, electrical hazards and equip-
ment damage, be sure to use only the specified power sup-
ply voltage when operating the PL.
POWER
I
I:ON
o:OFF
o
4-4
(Side View)
PL-B900 Unit
WARNING
L
N
FG
Power Input Terminals
Connecting these two termi-
nals provides AC100V to
240V power.
L= live and N= Neutral
L
N
FG
This terminal is connected
to the PL's frame (chassis).
1) Confirm that the PL's power switch
is turned OFF. Then, remove the
power terminal's transparent plas-
tic cover.
Transparent Cover
PL B900/B910 Series Users Manual
Installation and Wiring
(screw size: M3)
Screws