Table of Contents
Advertisement
Chapter
5
5.1
Setup Procedures
This chapter explains how to enter a PL unit's system settings, as well as the
cautions required both before and during set up.
The following settings are those pre-set at the factory.
1) Attach the PL and its DU unit or an RGB monitor.
2) Connect a PS/2 keyboard to the PL.
3) Turn the PL, and the DU or the Analog monitor's power ON.
4) After the message "Press <DEL> to Enter SETUP" appears, press the [DEL]
key until the following screen is displayed.
STANDARD CMOS SETUP
BIOS FEATURES SETUP
CHIPSET FEATURES SETUP
POWER MANAGEMENT SETUP
PNP/PCI CONFIGURATION
LOAD BIOS DEFAULTS
LOAD SETUP DEFAULTS
ESC
:
Quit
F10
:
Save & Exit Setup
KEYBOARD ACTION KEYS
Provides a summary of the keyboard keys used to carry out the set up.
SYSTEM SETTING SELECTION AREA
Each of the titles (areas) listed here contains system setting items.
5) Use the arrow keys to move the cursor to the desired selection and use the
[Enter] key to select an item.
PL B900/B910 Series Users Manual
System Setup
ROM PCI/ISA BIOS (2A5LEU1C)
CMOS SETUP UTILITY
AWARD SOFTWARE, INC.
Time, Date, Hard Disk Type •••
5-1 Setup Procedures
5-2 System Parameters
SYSTEM MONITOR UTILITY
INTEGRATED PERIPHERALS
SUPERVISOR PASSWORD
USER PASSWORD
IDE HDD AUTO DETECTION
SAVE & EXIT SETUP
EXIT WITHOUT SAVING
:
Select Item
# $ % &
(Shift)F2
:
Change Color
5-1
Advertisement
Table of Contents
