Chapter 1 - Pl Basics; Prior To Operating The Pl; Pl System Design - PROFACE PL-B910 Series User Manual

Chapter
1
1.1

Prior to Operating the PL

Install Touch Panel Device
*When using PL-B900
series (PL-B900/B901)
touch panel
PL B900/B910 Series Users Manual
PL Basics
Connect Display Unit
Turn Display ON
Turn PL Main Unit ON
Set Up the PL's Overall
System
Install your PL OS
Install PL-X900 Series Driver
and Utility Disk software
Install Display Driver
Driver*
Enter Screen Settings
(color, contrast)
Perform Calibration
1. Prior to Operating the PL

2. PL System Design

3. Optional Items
When connecting Digital's standard display:
3.1.8 Connecting the Standard Display
When connecting an Analog RGB Monitor:
3.1.9 Connecting an Analog RGB Monitor
4.3 Wiring the PL
Chapter 5 System Setup
Refer to the OS maker's installation
manual, and 6.1 Setting Up Your PL OS
*When using PL-B910 series
(PL-B910/B911) touch panel
Install USB Touch Panel
Control Utility*
Install Touch Panel Device
Driver
Enter Panel Name and Mode
setting
1-1