3.1.6 Installing an Expansion Board
PL B900/B910 Series Users Manual
1) Unscrew the desired expansion
slot's cover attachment screw, and
remove the cover.
the Rear Maintenance Cover
Unscrew the Blank Panel's attach-
ment screw to remove the Blank
Panel.
2) Remove the expansion slot's duster
cover.
3) Insert the expansion board into the
expansion slot.
4) Secure the expansion board's metal
positioning strip in place with its
Positioning
attachment screw.
Strip
Attachment
Screw
5) Last, replace the rear maintenance
cover and half cover and secure
them in place with their attach-
ment screws.
3.1.1, Removing
3-9