PROFACE PL-B910 Series User Manual page 14

• After completing the hardware setup, before any data or applica-
tions can be placed on the HDD drive, the OS (Windows
etc.) must be used to initialize the HDD and create partitions. For
details concerning these procedures, refer to the OS maker's instal-
lation manual.
• For system setup and OS installation, a PS/2 type keyboard is necessary.
• Since the PL's hard disk drive (HDD) is a consumable item, i.e. it has
a limited lifetime, be sure to back up its data regularly and prepare a
spare HDD unit.
• After turning the PL OFF, be sure to wait at least 5 seconds before
turning it ON again. If the unit is started too soon, it may not start up
correctly.
• The software contained in the PL's accompanying [Driver and Utility Disk]
is designed specifically for use with only the following OS types. If this
software is used with other OS types, its performance cannot be guaran-
teed.
PL-B900 Series units
(PL-B900/PL-B901)
PL-B910 Series units
(PL-B910/PL-B911)
PL B900/B910 Series Users Manual
PL Model
Windows® 95
Windows® NT
Windows® 98
Second Edition
OS Type
or MS DOS ,
® ®
1-2