Table of Contents
Advertisement
Chapter 2 - Specifications
2.4
PL Part Names and Features
A
Front Face
C
D
E
J
PL-B900/PL-B910 Rear Face
C
D
E
J
PL-B901/PL-B911 Rear Face
PL B900/B910 Series Users Manual
A: Front Face FDD Unit Attachment Slot
B: Display Expansion Board Cover
B
C: RS-232C Connector (COM1)
D: RS-232C Connector (COM2)
E: RS-232C Connector (COM3)
F
G
F: Printer Connector (LPT1)
H
G: RAS Connector
I
H: Rear Maintenance Cover
A
I: Power Terminal Block
F
G
J: IDE I/F Cover
H
I
Y
Digital's optional PL-FD210 is attached here.
Digital's optional expansion board (PL-PE200)
is attached here to allow the connection of an
additional display unit. (PL-B910/PL-B911 only)
These RS-232C interfaces (D-sub 9 pin male
connectors), allow communication with other
computers and connection to peripheral devices.
Centronics standard interface (D-sub 25 pin
female connector), which connects a parallel
device, such as a printer .(supports ECP/EPP)
Interface for DIN, DOUT, Watchdog, and Re-
mote Reset. (D-sub 25 pin male connector)
When optional DIM modules or Expansion
Boards are installed, this cover must be re-
moved.
The PL's AC100V/240V power cord terminals are
connected here.
To connect the optional CD-ROM drive unit (PL-
DK200) and Mirror Disk Unit (PL-MD200-
HU01), remove this cover and use this connector.
2-9
Advertisement
Table of Contents
