Figure 2-3: The Device Name Listed On The Device Manager - Advantech PCI-1710 Manual

Chapter 2
After the PCI-1710/1710L/1710HG/1710HGL/1711/1711L/1716/1716L
card is installed, you can verify whether it is properly installed on your
system in the Device Manager:
1. Access the Device Manager through Control Panel/System/Device
Manager.
2. The device name of the PCI-1710/1710L/1710HG/1710HGL/1711/
1711L/1716/1716L should be listed on the Device Manager tab on
the System Property Page.

Figure 2-3: The device name listed on the Device Manager

Note:
If your card is properly installed, you should see the device name of
your card listed on the Device Manager tab. If you do see your device
name listed on it but marked with an exclamation sign "!", it means
your card has not been correctly installed. In this case, remove the
card device from the Device Manager by selecting its device name and
press the Remove button. Then go through the driver installation
process again.
After your card is properly installed on your system, you can now
configure your device using the Device Installation Program that has
itself already been installed on your system during driver setup. A
complete device installation procedure should include device setup,
configuration and testing. The following sections will guide you
through the Setup, Configuration and Testing of your device.
PCI-1710 series User's Manual – 14 –
Advantech Co., Ltd.
www.advantech.com