Figure 2.9 The Device Name Listed In The Device Manager; Device Preinstallation - Advantech PCI-1706U User Manual

11. After the PCI-1706 driver is installed, you can verify whether it is properly
installed on your system in the System Device Manager:
(1) Access the System Device Manager.
(2) The device name of the PCI-1706 should be listed on the Advantech DAQ
Devices tab.

Figure 2.9 The Device Name Listed in the Device Manager

2.2.2

Device Preinstallation

PCI-1706 DAQNavi Driver supply device preinstallation if you install PCI-1706
DAQNavi Driver package from CD-ROM without the PCI-1706 card installed in the
System.
1. Install PCI-1706 DAQNavi Driver from CD-ROM.
2. Turn off your computer and unplug the power cord and cables. TURN OFF your
computer before installing or removing any components on the computer.
3. Remove the cover of the computer.
4. Remove the slot cover on the back panel of your computer.
5. Touch the metal part on the surface of your computer to neutralize the static
electricity that might be on your body.
6. Insert the PCI-1706 card into a PCI slot. Hold the card only by its edges and
carefully align it with the slot. Insert the card firmly into place. Use of excessive
force must be avoided, otherwise the card might be damaged.
7. Fasten the bracket of the PCI card on the back panel rail of the computer with
screws.
8. Connect appropriate accessories(68-pin cable, wiring terminals, etc. if neces-
sary) to the PCI card.
9. Replace the cover of your computer chassis. Re-connect the cables you
removed in step 3.
10. Plug in the power cord and turn on the computer.
PCI-1706U User Manual 14