Otto Bock 12K100N 50-S Instructions For Use Manual page 18

9 Completion of the DynamicArm
18 | Ottobock
Slip the disposable foam cover over the
DynamicArm .
Mark the corresponding length according
to the determined measurement 'X' (see
section 6, item 7).
1
Use scissors to cut-off the disposable
foam cover.
2
Connect the cables with the electric wrist
rotator / coaxial plug.
Next mount the electric rotator / coaxial plug
into the lamination ring of the threaded tube.
See the 647G152 Instructions for Use.
3
Pull the disposable foam cover previously
cut to length over the DynamicArm .
Mount the prosthetic components.
Pull the cosmetic glove over the system
electric hand.
In case of a fitting with the electric wrist rota-
tor, make sure that the rotational movement
is working smoothly.
4
DynamicArm (Service/Test)