Otto Bock 12K100N 50-S Instructions For Use Manual page 13

DynamicArm Service (Service/Test)
Example: Prosthetic socket with 12K100N
DynamicArm and system electric hand.
1
Rotate the prosthetic component (system
electric hand or system electric greifer) until
the quick disconnect wrist unlocks. Carefully
pull off the prosthetic components.
Caution! The DynamicArm must
be switched off before removing
the prosthetic components.
2
Turn the finger wheel counter-clockwise to
set minimum compensation. This will prevent
the band from being pulled in.
Note:
A DynamicArm with a retracted
band must only be repaired by
an authorized Ottobock Myo-
Service provider !
3
Ottobock | 13