Otto Bock 12K100N 50-S Instructions For Use Manual page 16

7 Length Ranges
8 Length Adjustment of the
16 | Ottobock
DynamicArm
7.1 Length Range 189 mm – 211 mm
Required accessories (see also section 5):
• Coaxial plug (item 5)
• Threaded tube, short, with lamination ring
and counter nut (item 3)
• DynamicArm (item 8)
7.2 Length Range 214 mm – 256 mm
Required accessories (see also section 5):
• Retaining ring (item 7)
• Electric wrist rotator (item 6) /
coaxial plug (item 5)
• Adapter short (item 2)
• Threaded tube, long, with lamination ring
and counter nut (item 4)
• DynamicArm (item 8)
7.3 Length Range 259 mm – 305 mm
Required accessories (see also section 5):
• Retaining ring (item 7)
• Electric wrist rotator (item 6) /
coaxial plug (item 5)
• Adapter long (item 1)
• Threaded tube, long, with lamination ring
and counter nut (item 4)
• DynamicArm (item 8)
1. On the basis of the measured length, you
assemble the corresponding version.
1
2. Screw the threaded tube in or out as re-
quired and adjust the measurement 'X' (see
section 6).
2
DynamicArm (Service/Test)