Activating The P Buttons - ABB CL Series Applications Manual

CL settings
DEBOUNCE
P BUTTONS
RUN MODE
CARD MODE æ
DEBOUNCE
P BUTTONS
RUN MODE
CARD MODE æ
216
The P buttons are activated and deactivated via the
P BUTTONS menu.
Press DEL and ALT to call up the system menu.
X
åÆ
Select the SYSTEM menu.
X
Move the cursor to the P BUTTONS menu.
X

Activating the P buttons

åÆ
If the logic relay shows
å
P buttons are active.
Otherwise select P BUTTONS and press OK.
X
The logic relay will then show
P buttons will be activated.
Press ESC to return to the status display.
X
Function of the P buttons
The P buttons are only active in the status display. In this
display you can use the P buttons to activate inputs in your
circuit diagram.
h If a text is displayed, the P buttons only function if a value
entry is not carried out.
Deactivating the P buttons
P BUTTONS å
Select
X
The logic relay will then show
P buttons will be deactivated.
h Deleting a circuit diagram in the logic relay will cause the
P buttons to be deactivated automatically. If a circuit
diagram is loaded from the memory module or from
CL-SOFT, the status set there is also transferred.
1SVC 440 795 M0100
P BUTTONS å
in the display, the
P BUTTONS å
and press OK.
P BUTTONS
and the
and the