Testing The Circuit Diagram - ABB CL Series Applications Manual

1SVC 440 795 M0100
I1-I2----ÄQ1
I1-I2----ÄQ1
SAVE
CANCEL
PROGRAM...Æ
STOP å RUN
PARAMETER..
INFO...
Press OK.
X
The logic relay proposes the relay coil
Ä
function and the output relay
have to be changed.
Your first working CL circuit diagram now looks like this:
Press ESC to leave the circuit diagram display.
The adjacent menu will appear.
Press OK.
X
The circuit diagram is now automatically saved. CANCEL
exits the circuit diagram. Changes that have been made to
the circuit diagram are not saved.
h The logic relay saves all the necessary circuit diagram and
program data retentively in the internal data memory.
Once you have connected pushbutton actuators S1 and S2,
you can test your circuit diagram straight away.

Testing the circuit diagram

Switch with ESC to the main menu and select the
X
å RUN
menu option.
STOP
With
to the RUN or STOP operating modes.
æ
The CL is in RUN mode if the tick is present at the
corresponding menu item, i.e.
h
The tick next to a menu item indicates which operating
mode or function is currently active.
Setting the menu language
Q1
Q1
are correct and do not
RUN å STOP å
and
STOP
. The specified coil
STOP
RUN
you switch
RUN å
.
65