1SVC 440 795 M0100
T3 Ü
I1
02.030
I2
05.000
T:
h
You can enable or disable parameter access using the "+"
or "–" parameter set characters in the circuit diagram.
Select the required function block with
X
S
+
Press the OK button.
X
Use the cursor buttons
X
parameters.
Change the values for a parameter set:
X
– Press OK to enter the Entry mode,
ú í
– Press
ÍÚ
– Press
– Press OK to save constants or
– ESC Retain previous setting.
Press ESC to leave the parameter display.
Adjustable parameters for function relays
You can also modify the function relay parameters used in
the circuit diagram in the PARAMETER menu.
Adjustable setpoint values are:
• With all function relays the setpoints
• On and off times with time switches.
In RUN mode the logic relay operates with a new setpoint as
soon as it has been modified in the parameter display and
saved with OK.
Example: Changing switch times for outdoor lighting
The outdoor lighting of a building is automatically switched
on from 19:00 to 23:30 Mondays to Fridays in the CL circuit
diagram.
Changing parameters
Í
Ú
or
to scroll through the
to change decimal place
to change the value of a decimal place,
Í
Ú
or
.
203