Parameter Display And Parameter Set For A Timing Relay - ABB CL Series Applications Manual

1SVC 440 795 M0100
T1 X
I1 00.000
I2 00.000
T:
X w g
S nAA.BBn
Ä sTRG dT1
yRES b+
Parameter display and parameter set for a timing
S +
relay
T1
Timing relay number 1
X
On-delayed mode
S
Time range in seconds
+
•
•
I1
Time setpoint 1:
• Positive value, I7, I8, I11, I12
• Actual value T1 to T16, C1 to C16
I2
Time setpoint 2 (with timing relay with 2 setpoints):
• Positive value, I7, I8, I11, I12
• Actual value T1 to T16, C1 to C16
T:
Display of actual value in RUN mode
In the parameter display of a timing relay you can change the
mode, the time base, the time setpoint 1, time setpoint 2
(if necessary) and the enable of the parameter display.
Compatibility of AC010 with CL-LSR/CL-LST and
CL-LMR/CL-LMT: Timing relay parameter display
The CL-LSR/CL-LST and CL-LMR/CL-LMT parameter display
has been provided with new functions. The AC010
parameters are at the following points.
AC010 parameter
T1
X
S
AA.BB
+
Timing relays
+
appears in the PARAMETER menu.
-
does not appear in the PARAMETER menu
CL-LSR/CL-LST-,
CL-LMR/CL-LMT
parameter
T1
=
X
=
S
=
AA.BB
=
+
=
T1 X S +
I1 AA.BB
I2
149