From The First Contact To The Output Coil - ABB CL Series Applications Manual

1SVC 440 795 M0100
I1 êê êê êêê
I1 I1 êê êêê
I1-I2 Â

From the first contact to the output coil

With the logic relay you work from the input to the output.
The first input contact is
Press OK.
X
The logic relay proposes the first contact
position.
X I
flashes and can be changed, for example, to a
pushbutton input using the cursor buttons Í or Ú.
However, nothing needs to be changed at this point.
Press OK 2 x, to move the cursor across the
X
second contact field.
You could also move the cursor to the next contact field
using the cursor button
Press OK.
X
Again, the CL inserts a contact
Change the contact number to
be connected to input terminal I2.
Press OK so that the cursor jumps to the next position and
X
use cursor buttons Í or Ú to change the number
h Press DEL to delete a contact at the cursor position.
Press OK to move the cursor to the third contact field.
X
You do not need a third relay contact, so you can now wire
the contacts directly up to the coil field.
Setting the menu language
I1
.
I1
at the cursor
í
.
I1
at the cursor position.
I2
so that n/c contact S2 can
P
for a
1
to the
2
.
63