ABB CL Series Applications Manual page 40

1SVC 440 795 M0100
CL-LSR/ I1 to I6
CL-LMR
I7, I8
CL-LMR I9, I10
I7, I8
CL-LSR/ I1 to I6
CL-LMR
I7, I8
CL-LMR I1 to I6
CL-LER/ R1 to
CL-LET R12
Table 1: Input signal values CL-AC1
Voltage range of the input signals
OFF signal
0 to 6 V AC
Table 2: Input signal values CL-AC2
Voltage range of the input signals
OFF signal
0 to 40 V
Cable lengths
Severe interference can cause a "1" signal on the inputs
without a proper signal being applied. Observe therefore the
following maximum cable lengths:
I1 to I6
I7, I8
I1 to I6
R1 to R12
Connecting the inputs
ON signal
14 to 26.4 V AC
greater than 7 V AC
or greater than
9.5 V DC
14 to 26.4 V AC
greater than 7 V AC
or greater than
9.5 V DC
ON signal
79 to 264 V
40 m without additional circuit
100 m without additional circuit
40 m without additional circuit
Input current
4 mA at 24 V AC
2 mA with 24 V AC and
24 V DC
4 mA at 24 V AC
2 mA with 24 V AC and
24 V DC
Input current
0.5 mA at 230 V AC/
0.25 mA at 115 V AC
6 mA at 230 V AC/4 mA
at 115 V
0.5 mA at 230 V AC/
0.25 mA at 115 V AC
37