Circuit Diagram Display - ABB CL Series Applications Manual

Commissioning
PROGRAM...
STOP å RUN
PARAMETER
INFO
Â
êê êê êê êêê
M
êê êê êê êêê
m l
êê êê êê êêê
L
êê êê êê êêê
I1-I2----ÄQ1
62
Press OK to switch to the main menu.
X
Press OK to switch to the next menu level, and press ESC to
move one level back.
h
OK has two other functions:
• Press OK to save modified settings.
• In the circuit diagram, you can also press OK to insert
and modify contacts and relay coils.
The logic relay is in STOP mode.
Press OK 2
X
menu items PROGRAM... r PROGRAM. This is where you
will create the circuit diagram.

Circuit diagram display

The circuit diagram display is currently empty. The cursor
flashes at the top left, which is where you will start to create
your diagram. The logic relay automatically proposes the first
contact input
Use the ÍÚ
invisible circuit diagram grid.
The first three double columns are the contact fields and the
right-hand columns form the coil field. Each line is a circuit
connection. The logic relay automatically connects the
contact to the power supply.
Now try to wire up the following CL circuit diagram.
X
The switches S1 and S2 are at the input whilst I1 and I2 are
the contacts for the input terminals. Relay K1 is represented
by the relay coil
function, in this case a relay coil acting as a contactor. Q1 is
one of up to eight CL output relays in the basic unit.
1SVC 440 795 M0100
to enter the circuit diagram display via
I1
.
ú í
cursor buttons to move the cursor over the
ÄQ1 Ä
. The symbol identifies the coil's