Scaling - ABB CL Series Applications Manual

1SVC 440 795 M0100
SWITCH;
CONTROL;
DISPLAYS;
MADE EASY!
RUNTIME M:S
T1 :012:46
C1 :0355
PRODUCED
Example of a text display:
The text display can display the following:
Line 1, 12 characters
Line 2, 12 characters, a setpoint or actual value
ST
Line 3, 12 characters, a setpoint or actual value
Line 4, 12 characters

Scaling

The values of the analog inputs can be scaled.
Range
10 to +10 V
10 to +10 V
10 to +10 V
Function
The D text output function block (D = Display, tex t display)
operates in the circuit diagram like a normal M marker. If a
text is assigned to a marker, this is displayed in the CL
display when the coil is set to 1. For this to take place, the
logic relay must be in RUN mode and the status display must
be activated before the text is displayed.
D2 to D16:
If several texts are present and are triggered, each text is
automatically displayed in turn every 4 s. This process will be
repeated until
• No other text display function block is set to 1.
• STOP mode is selected.
Text display
Selectable display
range
0 to 9999
g 999
g 9.9
Example
0000 to 0100
–025 to 050
–5.0 to 5.0
133