Wiring A Text Display - ABB CL Series Applications Manual

Wiring with the logic relay
i5-------ÄD2
i6-------ÄD3
D2u------ÄT5
D3k
132
h Compatibility with AC010
If you wish to load an existing AC010 circuit diagram, the
available text display functions are retained. The text
display operates in CL-LSR/CL-LST and CL-LMR/CL-LMT in
the same way as in AC010.

Wiring a text display

You integrate a text display into your circuit in the form of a
contact and coil.
The coils and contacts have the following meanings:
Contact
D1 D16
to
The text display does not have a parameter display in the
PARAMETER menu.
Retention
The texts D1 to D8 can be operated with retentive actual
values (contacts).
If the text displays are retentive, the actual value is retained
when the operating mode changes from RUN to STOP as
well as when the power supply is switched off.
When the logic relay is restarted in RUN mode, the text
displays D1 to D8 continue with the retentively stored actual
value.
Coil
Coil of the corresponding text
display is triggered
Ä Å è ^ ä
, , , , , If a coil is triggered, the text is
S R
, shown in the display.
D1 D16
to
1SVC 440 795 M0100