CL settings
DEBOUNCE
P BUTTONS
RUN MODE
CARD MODE
218
Deactivating RUN mode
RUN MODE
åÆ
Select
X
The RUN mode function is deactivated.
å
The default setting for the logic relay is for
æ
to be displayed. In other words, starts in RUN mode when
the power is switched on.
Table 32: Startup behaviour
Startup behaviour
The logic relay starts in
STOP mode
The logic relay starts in
RUN mode
Behaviour when the circuit diagram is deleted
The startup mode setting is a CL device function. When the
circuit diagram is deleted this does not result in the loss of
the setting selected.
Behaviour during upload/download to memory
module or PC
When a valid circuit diagram is transferred from the logic
relay to a memory module or the PC or vice versa, the setting
is still retained.
h
The CL models without a display can only be started in
RUN mode.
Possible faults
The logic relay does not start in RUN mode:
• The logic relay does not have a program in it.
• You have selected STOP mode (RUN MODE menu).
å
and press OK.
Menu displayed
RUN MODE
RUN MODE
å
1SVC 440 795 M0100
RUN MODE
å
Status of the logic
relay after startup
STOP mode
RUN mode