Displaying Device Information - ABB CL Series Applications Manual

1SVC 440 795 M0100
Displaying device
information
PROGRAM... Æ
STOP å RUN
PARAMETER...
INFO...
SET CLOCK..
DC TC LCD
OS: 1.00.027
CRC: 21779
PROGRAM_0815
The device information is provided for service tasks or in
order to determine the performance level of the device.
This function is only available with devices featuring a
display.
Exception: Terminal mode with the display system.
The logic relay allows you to show the following device
information:
• Power supply AC1, AC2 or DC1, DC2,
• T (transistor output) or R (relay output)
• C (clock provided)
• LCD (display provided)
• OS: 1.10.204 (operating system version)
• CRC: 25825 (Checksum of the operating system is only
displayed in STOP mode).
• Program name if this was assigned with CL- SOFT.
Switch to the main menu.
X
h The device information is always available. The password
does not prevent access.
Select the main menu.
X
Select the INFO.. menu with the cursor button Ú.
X
Press the OK button.
X
æ
This will display all device information.
Press ESC to exit the display.

Displaying device information

225