Setting Up The Gigaset Powerline Adapter 200 - Siemens Gigaset Powerline Adapter 200 User Manual

Installation
EP in the bottom line of the label indicates that this device is preconfigured as end point
(automatic).
S/N Serial number: 0001E3ABCDEF
LAN MAC MAC address
00:01:E3:AB:CD:EF
where the first 6 digits is the Siemens vendor ID (00:01:E3).
Network ID Network ID
ASCII string, max. 20 characters long
Network key Network Key
ASCII string, max. 24 characters long

Setting up the Gigaset Powerline Adapter 200

The Gigaset Powerline Adapter 200 can be set up in any suitable location in your home
or office. You do not need any special wiring. However you should comply with the fol-
lowing guidelines:
u
Only operate the Gigaset Powerline Adapter 200 indoors within a temperature range
of +0 to +40 °C. Do not position the Gigaset Powerline Adapter 200 near sources of
heat. Do not cover the ventilation slots. High temperatures can damage the device.
u
A mains socket for 85 to 265V must be available where you set up the Gigaset Pow-
erline Adapter 200.
u
Position the Gigaset Powerline Adapter 200 on a non-slip surface.
u
Do not place the Gigaset Powerline Adapter 200 on any furniture surface that could
be affected by the heat from the device.
u
Position the Gigaset Powerline Adapter 200 so that it cannot fall.
u
Lay the cables so that nobody can trip over them.
12
of the Gigaset Powerline Adapter 200 in the form: