No Fault Generated By Network Failure - Mp3.15 And Higher - Siemens NK8000 Series Installation, Configuration & Operation

Maintenance and diagnostics
9
Correcting communication failures
9.5.5
82
Building Technologies
CPS Fire Safety
Note: If these settings are incorrect, you will have no communication in runtime,
though no error message will be generated.

No fault generated by network failure - MP3.15 and higher

If you do not receive a fault from an NK8000 when a network failure has occurred,
or if there is a long delay before you receive the fault, decrease the Timer for Micro
Interruptions Threshold communication parameter.
Note: Default value is 0 sec.
A6V10062437_a_en
30.01.2019