ITech IT6412 User Manual page 55

The User can import the local-edited List documents to the power supply. This
function simplifies the List document edit and facilitates user operation.
Detailed operation steps are as below:
1.
2.
3.
4.
5.
6.
7.
Select Sequence.
If several Lists are edited, the User may select the required ones. Operating
procedures are as below:
1.
Create a new Excel document on local PC and name it ListCHx.
Open the Excel document and save it as in "other formats" in "(*.csv)".
Open the ListCHx.csv document and edit the List. Set every step of the List
and corresponding parameters.
Insert the USB (containing ListCHx.csv document) to the USB interface on
the front panel of power supply.
On the List Function interface, press the right [Channel 1/2] soft key to
select configuring channel, for example CH1.
By the , move the cursor to the List setting place and press the
Numeric key or Knob to set the List number value.
Press the [External Import] soft key and the power supply will
automatically identify the .csv document in the USB and import it.
Press the [Sequence Sel] soft key to enter the Sequence Selection
interface. The User can select the active List on this interface.
Copyright © Itech Electronic Co., Ltd.
List Function
47