Remove The Front Bezel From The S8510 Server - Avaya S8510 Manual

Job aids for field replacements (frus)
Hide thumbs Also See for S8510:
Table of Contents

Advertisement

4. In the Data Sets section select (check) all of the following data sets:
- ACP Translations and Save ACP translations before backup.
- Server and System Files
- Security Files
5. Select the Backup Method:
- Local PC Card (the USB-connected Compact Flash reader/card)
Tip:
Backing up to the USB Compact Flash saves remastering time.
Tip:
- Network Device: enter the customer-supplied information for:
User Name
Password
Host Name
Directory
6. Click Start Backup.
Wait for the message indicating that the backup was successful.

Remove the front bezel from the S8510 server

!
CAUTION:
Wear an antistatic wrist ground strap whenever you handle any S8510 server
CAUTION:
components. Connect the strap to an approved ground such as an unpainted
metal surface. Also, place the hard drive on an antistatic mat that is similarly
grounded. Do not place the new or the old drive on a bare surface.
To remove the bezel and cover to access the S8510 hard drive(s):
1. If locked, unlock the bezel with the system key (Note 1 in
from the Avaya S8510 server
Replacing either hard drive in the S8510 server
on page 36).
Figure 7: Remove the front bezel
03-602953 Issue 1 June 2008
35

Advertisement

Table of Contents
loading

Table of Contents