Instructions D'utilisation - Otto Bock 10V39 Instructions For Use Manual

7.4 Fabricating a laminated socket
Use the 743A18 Alignment Tool with wrist unit diameter 45 mm or 50 mm
during the fabrication of the laminated socket. For assembly of the 10V39
MovoWrist Flex, please follow the instructions under section 7.1.
8 Legal information
All legal conditions are subject to the respective national laws of the country
of use and may vary accordingly.
8.2 Liability
The manufacturer will only assume liability if the product is used in accor-
dance with the descriptions and instructions provided in this document.
The manufacturer will not assume liability for damage caused by disregard
of this document, particularly due to improper use or unauthorised modi-
fication of the product.
8.3 CE conformity
This product meets the requirements of the European Directive 93 / 42 / EEC
for medical devices. This product has been classified as a class I device
according to the classification criteria outlined in Annex IX of the directive.
The declaration of conformity was therefore created by the manufacturer
with sole responsibility according to Annex VII of the directive.
Date de la dernière mise à jour: 2017-06-20
• Veuillez lire attentivement l'intégralité de ce document avant d'utiliser
le produit.
• Respectez les consignes de sécurité afin d'éviter toute blessure et
endommagement du produit.
• Apprenez à l'utilisateur à bien utiliser son produit et informez-le des
consignes de sécurité.
• Conservez ce document.
1 Contenu de la livraison
10V39=* MovoWrist Flex (2)
647G375 Notice d'utilisation
11D105 Capot de protection (1)
18 | Ottobock
Français