Otto Bock 10V39 Instructions For Use Manual page 13

The wrist unit allows individual flexion and extension, locking in various posi-
tions in increments of 15° as well as rotation of the terminal device.
The wrist unit has been provided with a quick-release lock for an easy
exchange of the terminal devices.
The 10A30=* Adapter necessary for the wrist unit depends on the type
of connection of the terminal device and is therefore not included in the
delivery of the wrist unit. The various movements of the wrist unit allow for
a physiologically correct posture when using the prosthesis and reduce
the necessity of unnatural compensating movements.
3 Technical data
The flexion wrist unit has 5 setting positions with the following angles:
Neutral or zero setting 0°
Extension setting
Flexion settings
Rotation
Weight
Overall length
4 Safety instructions
Attention!
• To guarantee a solid bond, clean the respective areas with
acetone before applying the adhesive. Do not touch the areas
after you have degreased them and when the acetone has dried
up, apply the adhesive immediately.
• Follow all fabrication and safety considerations of the adhesive
manufacturer.
-15°
15°/30°/45°
20 locked positions every 18°
10V39=50
10V39=45
10A30=1/2"-20
10A30=M12×1,5
10A30=1
33 mm, of which 12 mm are visible on the distal
end of the forearm socket.
With the 10A30= M12×1,5 und 10A30=1/2"-20
Adapter mounted, the visible length of the distal
part increases to 17 mm.
about 130 g
about 110 g
about 20 g
about 20 g
about 58 g
Ottobock | 13