Windows Setup Static Ip Address - Videx IP videokit IPVK/6296 Series Installation Handbook

IPVK/6296 Series IP videokit
Windows
setup static IP address
DESCRIPTION
To setup a Videx IP system it is required that the PC that runs the VIDEX IP wizard and all VIDEX IP devices are connected on the same LAN.
Once made the physical connection, it is required to set properly the PC's network card connected to the LAN mentioned above.
Please proceed how follows to do it.

WINDOWS SETUP STATIC IP ADDRESS

The pictures are referred to Windows 10 operating
system but you can proceed in an similar way under
Windows 7.
Open the control panel right clicking on the start
menu or searching it from the search box.
Fig. 2 Select "Network and Sharing Centre"
Under "Network and Sharing Centre" click on "Change
adapter settings" on the left side of the window.
IPVK/6296 Series - Installation handbook
Fig. 1 Open control panel
Fig. 3 Select "Change adapter settings"
- 32 -
Under control panel items, click on "Network and
Sharing Centre".
66550062-EN - V 1.1 - 31/05/18