Videx IP videokit IPVK/6296 Series Installation Handbook page 54

IPVK/6296 Series IP videokit
VX IP Wizard
Wizard configuration software for VIDEX IP System
VIDEX CLOUD
This menu option description is placed at the end of this section because it should only be carried out after all other system config-
urations have been completed. This menu option will link or unlink the installation with the Videx Cloud services to enable the use
of the Videx apps.
UNLINK A SITE FROM VIDEX CLOUD
A user name and password is required to use this feature. This can be obtained by visiting https://www.videx-service.it and creating
a new account.
• Login to the Videx Cloud using the relevant credentials.
• Once authenticated click on the "Unlink Site" button.
• Confirm when requested.
After doing this it will not be possible to use the apps (Videx Cloudnected Client app) with this installation.
LINK A SITE TO VIDEX CLOUD
By linking a site to the cloud it will be possible to use the Videx apps to answer and make calls on the system.
A user name and password is required to use this feature. This can be obtained by visiting https://www.videx-service.it and creating
a new account.
• Click on "Videx Cloud-> Link Site to Videx Cloud" (Fig. 32) then click on the "next" button.
• Enter the same username and password used for https://www.videx-service.it/ web site then click "login videx cloud" (Fig. 33).
• Once your receive the message "Valid Credentials... " (Fig. 34) click on the "next" button.
• The software requests formation about the site, fill in the proposed fields (Fig. 35) then click the "next" button.
• The system is ready to connect to Videx Cloud (Fig. 36) click the "finish" button to proceed.
• The system exchanges data with Videx Cloud (Fig. 37) and the site is linked.
After this operation the binding code field of each videophone installed on site is populated (Fig. 38).
IPVK/6296 Series - Installation handbook
- 54 -
66550062-EN - V 1.1 - 31/05/18