Download
Share
Print this page
Videx ESVK Manual
  1. Manuals
  2. Brands
  3. Videx Manuals
  4. Intercom System
  5. ESVK
  6. Manual

Videx ESVK Manual

“2 wire” bus one way, two way videokit.
Hide thumbs Also See for ESVK:

Advertisement

Quick Links

Download this manual
VIDEOKIT
ESVK/KRV86-KRV88 SERIES
"2 Wire" bus one way, two way videokit
ESVK
Rev.0.2
ESVKX
ESVKC
66550045-EN - V6.2 - 31/10/20
Rev.0.2
Rev.0.3
Installation handbook
KRV86
KRV88
We recommend
This equipment is installed by a
Competent Electrician, Security or
Communications Engineer.

Advertisement

loading
Need help?

Need help?

Do you have a question about the ESVK and is the answer not in the manual?

Questions and answers

Related Manuals for Videx ESVK

Summary of Contents for Videx ESVK

  • Page 1 VIDEOKIT ESVK/KRV86-KRV88 SERIES “2 Wire” bus one way, two way videokit ESVK Rev.0.2 ESVKX Rev.0.2 ESVKC Rev.0.3 KRV86 KRV88 Installation handbook We recommend 66550045-EN - V6.2 - 31/10/20 This equipment is installed by a Competent Electrician, Security or Communications Engineer.

  • Page 2: Table Of Contents

    This manual has been written and revised carefully. The instructions and the descriptions which are included in it are referring to VIDEX parts and are correct at the time of print. However, subsequent VIDEX parts and manuals, can be subject to changes without notice.

  • Page 3: System Components And Available Versions

    15,7 43,8 120,0 Flush Surface Mounting Mounting Fig. 1 - ESVK/KRV86 - ESVK/KRV88 components (measures in mm) ESVK-1/KRV86 - ESVK-1/KRV88 - flush mounting 1 Outdoor station composed of: 1 Colour videophone 1 Power supply 1 Art. 4384-1: 1 button camera unit Art. KRV86 or...
  • Page 4 ESVK/KRV86 - ESVK/KRV88 Series “2 wire Bus” videokit System components and available versions ESVKX/KRV86 - ESVKX/KRV88 Colour videokit with embended proximity key reader. OUTDOOR INDOOR STATION Videophone STATION Art. KRV86 or 135,0 45,0 22,7 Art. KRV88 pag. 23 Camera unit Art. 4384X pag. 10...
  • Page 5 ESVK/KRV86 - ESVK/KRV88 Series “2 wire Bus” videokit System components and available versions ESVKC/KRV86 - ESVKC/KRV88 Colour videokit plus a codelock module. OUTDOOR INDOOR STATION Videophone STATION Art. KRV86 or 135,0 45,0 22,7 Art. KRV88 pag. 23 Camera unit Art. 4384 pag. 10...

  • Page 6: General Directions For Installation

    CABLE TYPES AND CROSS SECTIONAL AREAS The ESVK two wire videokits with 7” monitors can use several types of cables but depending on their specification will allow differ- ent distances up to 250 meters maximum. We do not recommend the use of shielded cables because of the high eddy capacitance.
  • Page 7 ESVK/KRV86 - ESVK/KRV88 Series “2 wire Bus” videokit General directions for installation CABLES LENGTH & SIZE 7" Videophones Art.6788 Art.KRV782 Wires Section Cable Type B max (mm2) VIDEX CM2 0.50 CAT5 UTP/CW1308 0.22 Std Telephone Cable 0.28 Standard wire Art.2321...
  • Page 8 ESVK/KRV86 - ESVK/KRV88 Series “2 wire Bus” videokit General directions for installation CABLES LENGTH & SIZE 7" Videophones 7" Videophones Art.6788 Art.KRV782 Art.6788 Art.KRV782 Wires Section Cable Type B max (mm2) VIDEX CM2 0.50 Art318 CAT5 UTP/CW1308 0.22 Std Telephone Cable 0.28 Standard wire Art.2321...
  • Page 9 ESVK/KRV86 - ESVK/KRV88 Series “2 wire Bus” videokit General directions for installation CABLES LENGTH & SIZE 7" Videophones 7" Videophones Art.6788 Art.KRV782 Art.6788 Art.KRV782 Wires Section Cable Type B max (mm2) VIDEX CM2 0.50 Art.317N CAT5 UTP/CW1308 0.22 Std Telephone Cable 0.28 Standard wire * Using the active distributor Art. 317N, the maximum ca-...
  • Page 10 ESVK/KRV86 - ESVK/KRV88 Series “2 wire Bus” videokit Art. 4384 Speaker unit with built-in camera Art. 4384X Speaker unit with built-in camera & proximity key reader Balance 4384-0 4384-1 4384-2 4384X-0 4384X-1 4384X-2 STEEL HIGH BRASS MATTE Made in Italy 1 2 3 4 5 6 7 8...
  • Page 11 ESVK/KRV86 - ESVK/KRV88 Series “2 wire Bus” videokit Art. 4384 Speaker unit with built-in camera Art. 4384X Speaker unit with built-in camera & proximity key reader PROGRAMMING The programming consists of the following settings: • Unit ID (1..15); • Door opening time (2 or 6 seconds);...
  • Page 12 ESVK/KRV86 - ESVK/KRV88 Series “2 wire Bus” videokit Art. 4384 Speaker unit with built-in camera Art. 4384X Speaker unit with built-in camera & proximity key reader RS485 CONNECTION switch to RS485 position With switch 8 in ON position the module can be connected using an...
  • Page 13 ESVK/KRV86 - ESVK/KRV88 Series “2 wire Bus” videokit Art. 4384 Speaker unit with built-in camera Art. 4384X Speaker unit with built-in camera & proximity key reader HOW TO CONNECT AN ELECTRIC LOCK The “door-open” relay can operate either as “dry contact” or “capacitive discharge” mode.
  • Page 14 ESVK/KRV86 - ESVK/KRV88 Series “2 wire Bus” videokit Art. 4384 Speaker unit with built-in camera Art. 4384X Speaker unit with built-in camera & proximity key reader PROGRAMMING TAGS (ONLY ART. 4384X VERSIONS) MASTER TAG The external module is supplied with a master tag. The master tag is programmed in-factory, it is white to easily stand out. This tag enables user tags to be programmed or cleared.
  • Page 15 ESVK/KRV86 - ESVK/KRV88 Series “2 wire Bus” videokit Art. 4384 Speaker unit with built-in camera Balance 4384-0 Art. 4384X Speaker unit with built-in camera & proximity key reader 4384-1 4384-2 REPROGRAMMING A MASTER TAGS 4384X-0 4384X-1 4384X-2 If the master tag is lost or damaged, a new one can be programmed using the following procedure:...
  • Page 16 ESVK/KRV86 - ESVK/KRV88 Series “2 wire Bus” videokit Art. 4384 Speaker unit with built-in camera Art. 4384X Speaker unit with built-in camera & proximity key reader CAMERA NOTES FIELDS OF VIEW MAXIMUM ILLUMINATION DISTANCE FROM CAMERA AT NIGHT The fields of view for standard camera are 55° for vertical angle and 115° for horizontal angle while for Wide Angle camera are 80°...
  • Page 17 GENERAL DIRECTIONS FOR INSTALLATION In order to achieve the best results from the schematics described it is necessary to install only original VIDEX equipment, strictly keeping to the items indicated on each schematic and follow these General Directions for Installation: •...

  • Page 18: Art. 4901 Digital Codelock Module

    ESVK/KRV86 - ESVK/KRV88 Series “2 wire Bus” videokit Art. 4901 Digital codelock module LOCK RELEASE BACK EMF PROTECTION A varistor must be fitted across the ter- VARISTOR (MOV) DIODE 1N4002 minals on AC lock release (Fig. 5) and a diode must be fitted across the ter- minals on a DC lock release (Fig.
  • Page 19 ESVK/KRV86 - ESVK/KRV88 Series “2 wire Bus” videokit Art. 4901 Digital codelock module PROGRAMMING • Enter the ENGINEER’S CODE: first time type six times 1 (111111 First time six times ENTER THE factory preset) and press ENTER (The red LED will illuminate);...
  • Page 20 ESVK/KRV86 - ESVK/KRV88 Series “2 wire Bus” videokit Art. 4901 Digital codelock module CONNECTION TERMINALS SIGNALS CLEANING OF THE PLATE Use a clean and soft cloth. Use moderate warm water or non-ag- SW2 Relay 2 command signal (active low) gressive cleansers.
  • Page 21 ESVK/KRV86 - ESVK/KRV88 Series “2 wire Bus” videokit 4000 Series Surface and flush mounting door station installation EXAMPLE: INSTALLING A FOUR MODULE OUTDOOR STATION fig. 1 fig. 2 fig. 3 fig. 4 fig. 5 fig. 6 fig. 7 fig. 8 fig.
  • Page 22 ESVK/KRV86 - ESVK/KRV88 Series “2 wire Bus” videokit 4000 Series Surface and flush mounting door station installation INSTALLING A SURFACE MOUNT DOOR STATION 1. Place the surface box against the wall (165-170cm between the top of the box and the floor level as shown in Fig. 1) and mark the fixing holes for the wall plugs and the hole for the cables (fig. 2).
  • Page 23 ESVK/KRV86 - ESVK/KRV88 Series “2 wire Bus” videokit Art. KRV86-KRV88 Rev.0.1 3.5” hands free videomonitor for VX2300 digital system Fig. 1 Art. KRV86 front Fig. 2 Art. KRV88 front Fig. 3 Art. KRV88 back DESCRIPTION LEGEND Microphone Intelligent Hands free video monitor for the VX2300 digital sys-...
  • Page 24 ESVK/KRV86 - ESVK/KRV88 Series “2 wire Bus” videokit Art. KRV86-KRV88 3.5” Hands free videomonitor for VX2300 digital system PUSH BUTTONS AND CONTROLS Door Open Button During a conversation, momentary operation of this button will release the door from where the call originated. This will be confirmed by an acoustic tone and the key icon on the top of the screen under the date, time &...
  • Page 25 ESVK/KRV86 - ESVK/KRV88 Series “2 wire Bus” videokit Art. KRV86-KRV88 3.5” Hands free videomonitor for VX2300 digital system PROGRAMMING OSD MENU When the system is in stand-by, keep pressed the button until the monitor switches on showing the screen to the left.
  • Page 26 ESVK/KRV86 - ESVK/KRV88 Series “2 wire Bus” videokit Art. KRV86-KRV88 3.5” Hands free videomonitor for VX2300 digital system EXTENSION NO – SW.2..3 If the intercommunication between apartments is enabled (switch 1 of SW3 = ON) EXTENSION NO. leave these two switches in default position (both to OFF). Otherwise, if the inter-...
  • Page 27 ESVK/KRV86 - ESVK/KRV88 Series “2 wire Bus” videokit Art. KRV86-KRV88 3.5” Hands free videomonitor for VX2300 digital system DURING THE CONVERASTION During the conversation (Fig. 13): 1 5 / 1 2 / 1 1 1 4 . 5 ° C 0 9 : 2 3 1 5 / 1 2 / 1 1 1 4 .
  • Page 28 ESVK/KRV86 - ESVK/KRV88 Series “2 wire Bus” videokit Art. KRV86-KRV88 3.5” Hands free videomonitor for VX2300 digital system CONNECTION TERMINALS SIGNALS Alarm input (not implemented yet) Local bell input (active low) LB_AL Ground output for use in combination with AL & LB active low inputs Auxiliary LED power supply input (+12Vdc –...
  • Page 29 ESVK/KRV86 - ESVK/KRV88 Series “2 wire Bus” videokit Kristallo Series 3.5" flush and surface videomonitor wall mounting instructions Fig. 1b Fig. 1 Fig. 1a Fig. 2 Fig. 3 Fig. 3a Fig. 2a Fig. 4a Fig. 4b Fig. 4 - 29 - ESVK/KRV86 - ESVK/KRV88 Series - Installation handbook 66550045-EN - V6.2 - 31/10/20...

  • Page 30: Kristallo Series 3.5" Flush And Surface Videomonitor Wall Mounting Instructions

    ESVK/KRV86 - ESVK/KRV88 Series “2 wire Bus” videokit Kristallo Series 3.5" Flush and surface videomonitor wall mounting instructions FLUSH MOUNT KRISTALLO VIDEOPHONE 1. Protect the holes to fix the videophone to the flush mounting box then embed the flush mounting box in line with the wall in a vertical position at 135cm height from the floor as shown in Fig.
  • Page 31 ESVK/KRV86 - ESVK/KRV88 Series “2 wire Bus” videokit Art. 2321-2321/P Power supplies Art.2321 157,5 Fig. 1 Fig. 2 DESCRIPTION CONNECTION TO MAINS These two power supplies are specifically designed for VX2300 WARNING! digital system. The system must be installed only by a qualified The Art. 2321 can be used for systems with 1 entrance up to 20 users.
  • Page 32 ESVK/KRV86 - ESVK/KRV88 Series “2 wire Bus” videokit Art. 2322 Power supply converter from BUS line to 12 Vdc Art.2322 Fig. 1 Fig. 2 DESCRITPION LEGEND When this unit is connected to the BUS line it generates a Connection terminals +12Vdc – 100mA power source. This unit can be used to supply peripherals such as the Art. 4901 or Art. 4902 without the need...

  • Page 33: Art. 4042 .. 4045

    4, 6, 8 or 10 call push buttons. figuration jumpers Name plate holders J2 and J1 jumpers to con- Specific for use in combination with VIDEX IP camera units Right side push button Art.  4533, VX2200 camera units Art.  4284 and VX2300 camera figure illumination LEDs configuration jumpers units Art. 4384.
  • Page 34 ESVK/KRV86 - ESVK/KRV88 Series “2 wire Bus” videokit Art. 4042 .. 4045 Single row button expansion modules Art. 4042D .. 4045D Double row button expansion modules POWER SUPPLY To give power supply to the module connect one of the inbuilt IDC male...
  • Page 35 ESVK/KRV86 - ESVK/KRV88 Series “2 wire Bus” videokit Art. 4042 .. 4045 Single row button expansion modules Art. 4042D .. 4045D Double row button expansion modules ADHESIVE GASKET PLACEMENT Apply the seal as shown in Fig. 6. ANTI-TAMPERING LOCKS FIXING Fit the anti-tampering locks as shown in Fig.
  • Page 36 (mise hors tension puis Push to (power off then power on). Exit sous tension). Title: Data creazione: Foglio ESVK-1/KRV86, ESVK-1S/KRV86, ESVK-1/KRV88, ESVK-1S/KRV88 One Way Videokit 12/06/2020 Titolo: Data modifica: ESVK-1/KRV86, ESVK-1S/KRV86, ESVK-1/KRV88, ESVK-1S/KRV88 Videokit Monofamiliare 27/10/2020 Videx Electronics S.p.A. Notes:...
  • Page 37 Push to (power off then power on). Exit Title: Data creazione: Foglio ESVK-2/KRV86, ESVK-2S/KRV86, ESVK-2/KRV88, ESVK-2S/KRV88 Two Way Videokit 12/06/2020 Titolo: Data modifica: ESVK-2/KRV86, ESVK-2S/KRV86, ESVK-2/KRV88, ESVK-2S/KRV88 Bifamiliare 27/10/2020 Videx Electronics S.p.A. Notes:...
  • Page 38 Foglio ESVKC-1/KRV86, ESVKC-1S/KRV86, ESVKC-1/KRV88, ESVKC-1S/KRV88 One Way Videokit 15/06/2020 Titolo: Data modifica: ESVKC-1/KRV86, ESVKC-1S/KRV86, ESVKC-1/KRV88, ESVKC-1S/KRV88 Videokit Monofamiliare 27/10/2020 Videx Electronics S.p.A. Notes: Autore: Marco Rongoni Via del Lavoro 1, 63846 Monte Giberto (FM) Note: Cod.File: Phone: +39 0734 631669 - Fax +39 0734 631669 4384-kr-003.dwg...
  • Page 39 Foglio ESVKC-2/KRV86, ESVKC-2S/KRV86, ESVKC-2/KRV88, ESVKC-2S/KRV88 Two Way Videokit 12/06/2020 Titolo: Data modifica: ESVKC-2/KRV86, ESVKC-2S/KRV86, ESVKC-2/KRV88, ESVKC-2S/KRV88 Videokit Bifamiliare 27/10/2020 Videx Electronics S.p.A. Notes: Autore: Marco Rongoni Via del Lavoro 1, 63846 Monte Giberto (FM) Note: Cod.File: Phone: +39 0734 631669 - Fax +39 0734 631669 4384-kr-004.dwg...
  • Page 40 Exit Title: Data creazione: Foglio ESVK-1/KRV86, ESVK-1S/KRV86, ESVK-1/KRV88, ESVK-1S/KRV88 One Way Videokit with additional intercom, relay to control an additional sounder, relay for two additional services and external camera 12/06/2020 Titolo: Data modifica: ESVK-1/KRV86, ESVK-1S/KRV86, ESVK-1/KRV88, ESVK-1S/KRV88 Videokit Monofamiliare con citofono addizionale, relé per l'estensione della suoneria, relé per due servizi addizionali e telecamera esterna 27/10/2020 Videx Electronics S.p.A.
  • Page 41 To next To next Title: Data creazione: Foglio 09/06/2020 Titolo: Data modifica: 09/06/2020 Videx Electronics S.p.A. Notes: Autore: Marco Rongoni Via del Lavoro 1, 63846 Monte Giberto (FM) Note: Cod.File: Phone: +39 0734 631669 - Fax +39 0734 631669 404x.dwg www.videx.it - info@videx.it...
  • Page 42 - 42 - 66550045-EN - V6.2 - 31/10/20...
  • Page 43 DISPOSAL In accordance with the Legislative Decree no. 49 of 14 March 2014 “Implementation of the Directive 2012/19/EU on waste electrical and electronic equipment (WEEE)”. The crossed-out bin symbol on the equipment or on the packaging indicates that when the product reaches the end of its lifetime, it must be collected separately from mixed municipal waste.
  • Page 44 MANUFACTURER VIDEX ELECTRONICS S.P.A. FABBRICANTE Via del Lavoro, 1 FABRICANT 63846 Monte Giberto (FM) Italy FABRICANTE Tel (+39) 0734 631669 FABRIKANT Fax (+39) 0734 632475 ‫الشركة المص ن ِّ عة‬ www.videx.it - info@videx.it CUSTOMER SUPPORT VIDEX ELECTRONICS S.P.A. UK Customers only: SUPPORTO CLIENTI www.videx.it - technical@videx.it...

This manual is also suitable for:

EsvkxEsvkcKrv86Krv88Esvk seriesKrv782 series