Videx IP videokit IPVK/6296 Series Installation Handbook page 25

IPVK/6296 Series IP videokit
Art. 6296
IP Videophone for VIDEX IP System
SWITCHING BETWEEN DOOR PANEL CAMERA AND EXTERNAL VIDEO SOURCE
The door panel allows the connection of an external video source for an external camera or a connection to a CCTV system.
When the panel is set to connect an external camera, it is also possible to establish which is the default video signal transmitted
during a call: the internal or the external one. During the conversation it is possible to switch to the secondary camera and to con-
nect back to the primary.
• During the conversation press and keep pressed the
• The display now shows the video coming from the alternative video source (Fig. 44).
• To switch again the video source proceed as described at the first step above (Fig. 45).
• If there are no external video sources connected to the door panel, an alert message will be shown (Fig. 46).
Main Entrance
Switching video source
Fig. 43
Main Entrance
Switching video source
Fig. 45
IPVK/6296 Series - Installation handbook
SWITCHING
Video Camera
SWITCHING
Video Camera
button until the display shows the camera switching notice (Fig. 43).
Main Entrance
The display shows the alternative video source
Fig. 44
Main Entrance
No external camera connected
Fig. 46
- 25 -
Secondary
Video Camera
Not Present
66550062-EN - V 1.1 - 31/05/18