Videx IP videokit IPVK/6296 Series Installation Handbook page 46

IPVK/6296 Series IP videokit
VX IP Wizard
Wizard configuration software for VIDEX IP System
SETTINGS
The settings menu is available to set system parameters and preferences.
EDIT DEVICE GLOBAL PARAMETERS
Under this menu (Fig. 8) you can edit the following parameters:
• "
Conversation Max Time
the call will automatically end.
• " "; specifies the length of time the system will wait for a call to be answered before clearing the call down.
Ringing Max Time
PREFERENCES
Under this menu (Fig. 9) you can edit the following preferences:
• "
Default description prefix for new video door panels
panel name.. This prefix will be automatically combined with the device ID during the devices initialisation*.
• "
Default description prefix for new video intercoms
default video intercom name. This prefix will be automatically combined with the device ID during the devices initialisation*.
• "
Default first ID for new devices
the last ID will be 109.
• "
Default first IP address for new devices
a system including 10 devices, the last IP address used will be 192.168.2.19.
• "
Default Subnet for new devices
• "
Default gateway for new devices
* To easily identify different devices type.
UTILITIES
This option can be used to reset one or more devices to their factory default settings.
RESET ALL DEVICES TO FACTORY DEFAULTS
When you select this option the software ask for confirmation (Fig. 10) , if selected all discovered devices on the system will be reset
to their factory default settings: the videophones will show the screen in Fig. 12 and the door panels will switch off all four LEDs.
RESET ONE OR MORE DEVICE TO FACTORY DEFAULTS
When you select this option you are able to select which devices to restore to factory defaults (Fig. 11). Once selected proceed by
clicking the "
reset devices
Take care when selecting this option as all programmed settings will be lost. i.e. all device names, device network settings, button
configurations and output selections.
IPVK/6296 Series - Installation handbook
"; specifies the maximum duration of the conversation once the resident answers the call. After which
" First numeric ID to use for new devices. If the starting ID is 100, in a system including 10 devices,
" Starting IP address to assign to new devices. If the starting IP address is 192.168.2.10, in
" subnet for the system in which the intercoms will be installed.
" gateway for the system in which the intercom will be installed.
" button.
" This prefix will be combined with the device ID to create the default door
" This prefix will automatically be combined with the device ID to create the
- 46 -
66550062-EN - V 1.1 - 31/05/18