Videx IP videokit IPVK/6296 Series Installation Handbook page 24

IPVK/6296 Series IP videokit
Art. 6296
IP Videophone for VIDEX IP System
CAMERA RECALL
The camera recall is a function that allows the connection to any door panel installed on the system even if you have not received a call
previously. It is a feature that can be used for safety purposes in case you have a reason to check what's happening outside your home.
• The button, if the "Panels Address Book" it is not empty (Fig. 37), initialises a camera recall to the favourite* door panel .
• If the handset is on its cradle, the display shows the warning to pick up the handset (Fig. 38) then the camera recall initialising screen (Fig. 39).
• Once connected, the display shows the video coming from the door panel and through the handset can be heard the speech
from outside while the speech from inside is mute (Fig. 40).
• To enable the speech from inside and start the conversation, press and keep pressed the
symbol (Fig. 41).
• With the speech mute (Fig. 40) or open (Fig. 41), by pressing momentarily the
• To open the door press the
* Note that favourite door panel is set during the system configuration using the "Videx IP Wizard" software.
** The relay activated depends on the configuration of the button, as factory default it activates relay 1 of the active door panel.
MAIN MENU
Empty panel address book
Fig. 37
Main Entrance
Initialising camera recall
Fig. 39
Main Entrance
Full duplex speech enabled
Fig. 41
IPVK/6296 Series - Installation handbook
button (Fig. 32)** while to close the connection hang up the handset
15:30
Panel Address Book
Is Empty
button you can manually take a picture of the visitor (Fig. 42).
Pick up the handset warning
Fig. 38
Main Entrance
Connection established with handset mic muted
Fig. 40
Main Entrance
taking a picture
Fig. 42
- 24 -
button until the display shows the speech
22/07/2017 18:45
66550062-EN - V 1.1 - 31/05/18