Problem Handling And Fault Diagnostics - TE Connectivity AT-SC Operating Instructions Manual

528050-1
13

Problem Handling and Fault Diagnostics

DANGER!
Due to the risk of hand or finger injury, never try to reach into the machine before
having assured that the machine is disconnected from the air supply.
CAUTION!
 Before starting maintenance, disassembly or repair work, the crimping machine
must be disconnected from air supply.
 Maintenance work may be performed only by authorized and properly trained
personnel.
 Die adapter and dies may only be removed when the machine is not in operation
and has been disconnected from the air supply. The housing and the covers in
particular may only be removed by specially trained personnel.
 When working with the Pneum. Parallel Crimp Machine AT-SC, do not wear loose
clothing, jewellery or long, loose hair that can get caught in the Pneum. Parallel
Crimp Machine AT-SC.
 Check the release button before starting the work on the crimp machine.
Information:
In case of a blockade of the dies disconnect the machine from air supply and press the
release button.
In the event of a problem our customer service personnel will be able to help you.
TE Connectivity
c/o Schenck Technologie- und Industriepark GmbH
Landwehrstr. 55/Gebäude 83
64293 Darmstadt
Field Service EMEA@te.com
GATD Kundendienst-Hotline: +49-6151-607-1518
Please have the following information ready when you contact service.
- Machine Type
- Machine Serial Number
Page 58 / 101
412-18876 Rev. G
ECOC: EGC0 ; LOC: AI