Removal From Service, Demounting, Disassembly; Storage; Disposal - TE Connectivity AT-SC Operating Instructions Manual

528050-1
14

Removal from Service, Demounting, Disassembly,

DANGER!
Due to the risk of hand or finger injury, never try to reach into the machine before
having assured that the machine is switched off.
CAUTION!
 Before starting maintenance, disassembly or repair work, the crimping machine
must be disconnected from air supply.
 Maintenance work may be performed only by authorized and properly trained
personnel.
 Die adapter and dies may only be removed when the machine is not in operation
and has been disconnected from the air supply. The housing and the covers in
particular may only be removed by specially trained personnel.
 Only one person is allowed to work on or with the machine at a time!
 Work with caution.
 The machine must not be removed from service before having dismounted the
adapter.
15

Storage

Store the machine in the original box at room temperature.
16

Disposal

For the disposal of the Pneum. Parallel Crimp Machine AT-SC, send it back to TE.
Page 59 / 101
412-18876 Rev. G
ECOC: EGC0 ; LOC: AI