Normal Operation / Production Cycle - TE Connectivity AT-SC Operating Instructions Manual

528050-1
- Select the proper locator, corresponding with
the die and terminal, and install it on to the
push-in device.
- Position the locator to the correct height and
distance and tighten it with the screw.
- Slide the terminal on to the guide plate.
INFORMATION:
Check for the right crimping position of the terminal and adjust the guide plate
accordingly.
- Connect air supply.
10

Normal Operation / Production Cycle

DANGER!
Due to the risk of hand or finger injury, never try to reach into the dangerous area.
CAUTION!
 The crimp machine is only allowed to be used with mounted adapter and die set.
 The crimp machine is only allowed to be used when it is in complete functional
condition.
 When working with the Pneum. Parallel Crimp Machine AT-SC, do not wear loose
clothing, jewellery or long, loose hair that can get caught in the Pneum. Parallel
Crimp Machine AT-SC.
 Work with caution.
 In cases of a machine malfunction, production must be stopped and the
malfunction must be fixed before continuing work with the machine.
 Only one person is allowed to work on or with the machine.
 Only trained personal are allowed to work on or with the machine.
 It is only allowed to work with the specified working pressure.
Page 53 / 101
412-18876 Rev. G
Fig. 9.07
Fig. 9.08
ECOC: EGC0 ; LOC: AI