Replacing The Front Usb Module; Removing The Front Usb Cable - Fujitsu PRIMERGY TX100 S2 Service Supplement Manual

Replacement routines
4.3

Replacing the front USB module

Part number: T26139-Y3894-V513
4.3.1

Removing the front USB cable

Ê Shut down the server and disconnect the AC power cord from the system.
Ê Remove the side cover as described in
on page 23.
Ê Open the front bezel as described in section
Ê Open the HDD cage as described in section
Figure 31: Disconnecting the front USB connector
Ê Disconnect the USB FRONT connector from the system board.
52
section "Removing the side cover"
Service Supplement
4.1.3.1 on page 28.
4.1.2.1 on page 25.
TX100 S2