Configuration Level Of The Redox Indicator; General; Analog Inputs - C111 - JUMO 202550 Operating Instructions Manual

17.1 General

Pre-
conditions

17.2 Analog inputs - C111

C111*
Unit
mV
1
pH
Analog input 1
0 — 20 mA
4 — 20 mA
Display unit
in %
in mV
Type of temperature acquisition
Manual temperature compensation
Automatic temperature compensation with Pt100
Automatic temperature compensation with Pt1000
46

17 Configuration level of the redox indicator

The basic functions of the instrument can be displayed and/or altered at the
configuration level.
If it is necessary to reconfigure a number of instrument
parameters,
Chapter 35.1 "Programming the controller", page 103ff.
For an explanation of the terminology used,
Chapter 33 "Glossary", page 93ff.
How to configure controllers,
Chapter 27.1 "Configuration", page 83ff.
How to access the configuration level, or leave this level,
Chapter 9.2 "Principle of operation", page 24ff.
The configuration level is unlocked,
"Unlocking the levels", page 27, (code word 0300).
2
*The factory-set parameters are shown in the position boxes.
1
If pH is selected as the measurement unit, refer to Chapter 13!
2
The redox voltage is independent of temperature; no provision is made
for temperature compensation. The temperature indication is switched
3
3
a b c d
1 1 0 0
I I I I
0 I I I
1 I I I
I I I
I I I
0 I I
1 I I
I I
I I
0 I
1 I
I
I
0
1
2