Simulated Process Value Output - JUMO 202550 Operating Instructions Manual

28.2 Simulated process value output

Setting When "Simulated process value output" has been configured,
Chapter 26.4 "Controller options - C211", page 76,
the upper display shows "HAnd" alternately with 50.0 (%).
Use to reduce the signal at the process value output in 10% steps,
use to increase the signal at the process value output in 10% steps.
Example: Output signal 0 — 20 mA,
intended simulated output signal 8 mA
=> Setting 40%
28 Manual operation
87