Beech ovens E Series Installation And Operation Manual page 49

Beech Ovens
E-Series Manual (R4)
Task to be performed
Item
Each morning before the oven is fired up, remove fire ashes
from the floor centre, using an ash pan and a shovel or
1
brush. A damp cloth may be used to remove any remaining
dust. DO NOT USE WATER ON THE OVEN FLOOR.
Clean the oven floor prior to cooking. Do NOT use water!
2
Cleanliness around the oven is essential. Ensure no debris
3
or rubbish is left around, under or in the oven area.
Ensure that the exhaust hood is operating.
4
5 Clean the oven spigot using the brass spigot brush.
Visually inspect the oven interior roof for blackness. Should
blackness become evident, the oven may need some
attention. If the blackness is from cooking foodstuffs, the
6 oven may need a period of high firing in excess of 450C, to
burn clean the oven cavity. If the blackness appears to be
from the gas flame, a qualified technician should be called to
service and adjust the system.
Visually check and clean any foodstuff, dirt or deposits from
7 burner with a suitable small brush. Take care not to damage
the tri-electrode over burner.
Page 49
Performed by
Daily

Oven Operator

Oven Operator

Oven Operator

Oven Operator

Oven Operator
Oven Operator
Oven Operator
2/09/2019 (C)
Confidential and Proprietary
Frequency
3
Weekly Monthly
Months



6
Months