Beech Ovens
E-Series Manual (R4)
Lifting Positions
Should the oven need to be transported into position using a crane, there are 4 x lifting
positions accessible by removing the top façade panel. The diagram below shows the
4x lifting eyelets positions in which to lift the Oven by crane depending on access to the
final installation position.
To remove the top façade panel, remove the screws around the perimeter and place the
panel in a safe place where it cannot be damaged.
Once in position, re-fit the panel in reverse order.
NOTE: Installation is to be carried out using suitable lifting equipment with
sufficient load capacity to suit the Oven weight. E.g. Hotel crane, mobile crane,
strapping, hooks, etc. Take care when lifting.
Page 13
Confidential and Proprietary
Oven Façade top panel
removed
Lifting points (x4)
2/09/2019 (C)