Installation Checklist - Beech ovens E Series Installation And Operation Manual

Beech Ovens
E-Series Manual (R4)

Installation Checklist

When the initial installation is complete, please read through the following checklist to
make sure the oven is safe for commissioning.
Legs fastened sufficiently to floor (if applicable) – oven is stable in position.
(Refer to Transportation)
Gas Burner(s) mounted firmly in position. (Refer to Gas Connection
Procedures)
All Gas fittings tight and correctly connected. (Refer to Gas Connection
Procedures)
Mains Electricity Supply sufficient earthed and in accordance with local
regulation. (Refer to Electrical Installation)
Check that the Exhaust Canopy/Hood and Duct installation is compliant with
local regulation. (Refer to Exhaust Canopy/Hood Design)
Check that there is sufficient access and ventilation both below and above
the Oven for maintenance and inspection.
Check that the area below and surrounding the oven is clean, tidy and free of
debris.
Check to ensure that suitable fire extinguishing equipment is close at
hand.
Page 27
Confidential and Proprietary
2/09/2019 (C)