Inspirator Calibration - Beech ovens E Series Installation And Operation Manual

Beech Ovens
E-Series Manual (R4)

Inspirator Calibration

The main function of the inspirator is to allow fresh air to mix with the gas before it
enters the nozzle of the burner. The amount of air that is mixed with the gas governs
how the flame will burn. The correct adjustment of the air/gas mixture is critical to
achieving a suitable flame.
Fresh air enters the
inspirator and mixes
with the gas
12.25mm S/S Supply pipe
connection point
(Display burner)
After Preheating is completed, adjust the Air/ Gas disc on the inspirator to achieve the
following flame characteristics:
• For Natural Gas, all flames should be blue at the base with light yellow tails,
• For ULPG, the flame will be mostly light yellow. The Air/Gas mixture disc will
need to be nearly fully open for ULPG. (Deep yellow to orange is NOT correct
and will deposit soot on the roof of the oven.)
Page 33
Confidential and Proprietary
Gas jet. Gas enters the
inspirator here.
Air/ Gas mixture disc.
By screwing the disc upwards,
it limits the amount of air that
is mixed with the gas.
Screwing it downwards
increases the amount of air
mixed with the gas.
2/09/2019 (C)