Digital Temperature Display; Burning Wood And Gas - Beech ovens E Series Installation And Operation Manual

Beech Ovens
E-Series Manual (R4)

Digital Temperature Display

The Digital Temperature Display has one main
function. To DISPLAY
temperature (PV- Present Value). The adjustable
setting will only enable the operator to display the
desired oven temperature (SV - Set value), but
has NO effect on the oven temperature.
To change the desired
indicator (SV) temperature up or down;
• Press <<PF to move the degree of
change. (i.e. to change tens or hundreds).
• Press the ▲ (up) or ▼ (down) arrows until
desired temperature is selected.
• Wait for 3 seconds for information to update.

Burning Wood and Gas

NOTE: To adhere to Australian Gas regulations, the combination of solid fuel
(wood, charcoal, etc.) and gas is not permitted.
For the Beech E-series ovens, it is not recommended that any wood be used in gas
ovens as the soot and ash created by the wood fire will affect the burner function and
eventually the gas burners will fail. If burning wood is required, it is advised to keep the
wood in a metal tray/pan and keep it well away from the gas burner.
If burning wood in a gas oven, it is strongly advised to check the exhaust configuration
for the oven as in some regions it is prohibited to burn solid fuel below an exhaust duct
which is connected with other kitchen equipment – i.e. any solid fuel appliance must
have a dedicated exhaust system.
Check with your local mechanical contractor before using solid fuel in the oven.
Page 44
the current oven
oven temperature
2/09/2019 (C)
Confidential and Proprietary